Body Electrical System
Fuel Filler Door Open Switch Repair procedures
In this manual: Body Electrical System
6steps
~36min
2/5difficulty
Done 0 of 6
Removal
Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
Remove the crash pad lower switch (A) after loosening the mounting screws.

Installation
Install the crash pad lower switch.
Install the crash pad lower panel.
Connect the negative (-) battery terminal.
Inspection
Check for continuity between the terminals. If there is an abnormality, replace the switch.


Was this page helpful?