Body Electrical System
Fuel Filler Door Release Actuator Repair procedures
In this manual: Body Electrical System
10steps
~60min
3/5difficulty
Done 0 of 10
Removal
Disconnect the negative (-) battery terminal.
Remove the left luggage side trim.
(Refer to Body - "Luggage Side Trim")
Disconnect the fuel filler door release actuator connector (A).

Remove the fuel filler door housing.
(Refer to Body - "Fuel Filler Door")
Remove the fuel filler door release actuator (A) after loosening the mounting bolts.


Installation
Install the fuel filler door release actuator.
Install the fuel filler door housing.
Connect the fuel filler door release actuator connector.
Install the left luggage side trim.
Connect the negative (-) battery terminal.
Inspection
Check for continuity between terminals No. 2 and No. 4. If there is no continuity, replace the fuel filler door release actuator.


Was this page helpful?