Clutch System

High voltage shut-off procedures

7steps
~42min
3/5difficulty
Done 0 of 7

High Voltage Shut-off Procedures

  1. Turn the ignition switch OFF and disconnect the auxiliary 12V battery negative (-) terminal.

  2. Remove the safety plug cover (A) under the rear seat..

  3. Unfasten the hook (A) to the direction of arrow.

  4. Unfasten the lever (A) to the direction of arrow.

  5. Remove the safety plug (A).

  6. Wait at least 5 minutes or until the capacitor in the high voltage system is fully discharged.

  7. Measure the voltage between the inverter terminals to check that the capacitor in the inverter is discharged completely.

    1. Remove air cleaner assembly and air duct.

      (Refer to Engine Mechanical System – “Air Cleaner”)

    2. Disconnect the inverter power cable (A).

    3. Measure the voltage between the inverter (+) terminal and the inverter (-) terminal.

      Less than 30V : High voltage circuit properly shut

      More than 30V : Fault on high voltage circuit