Clutch System
Specifications
In this manual: Clutch System
~1min read
Specifications
[Clutch Cover and Disc]
| Items | Specifications | |
| Clutch operation method | Hydraulic motor type | |
| Clutch cover | Type | Diaphragm spring strap |
| Clutch disc | Type | Single dry with diaphragm |
| Facing diameter (Outer × inner) |
Ø225 × Ø175mm (Ø8.8582 × Ø6.8897 in.) |
|
| Clutch disc thickness [When free] |
(Ø8.8582 × Ø6.8897 in.) | |
[Engine Clutch Actuator]
| Items | Specifications |
| Operation method | BLDC Motor |
| Input voltage (V) | 12 |
| Max power (W) | 480 |
| Operating temperature (°C) | - 30 to 105 °C |
| Resistance (Ω) | 120 |
Service Standard
| Items | Specifications |
| Clutch disc rivet depth | 0.3 mm (0.0118 in.) less than |
Tightening Torques
| Item | N·m | kgf·m | lb·ft |
| Clutch cover assembly mounting bolt | 11.8 - 14.7 | 1.2 - 1.5 | 8.7 - 10.8 |
| Engine clutch actuator mounting bolt | 21.6 - 26.5 | 2.2 - 2.7 | 15.9 - 19.5 |
| Concentric slave cylinder mounting bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 |
| Hydraulic pipe bracket mounting bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 |
| Reservoir mounting bolt | 3.9 - 5.9 | 0.4 - 0.6 | 2.9 - 4.3 |
Lubricants
| Item | Specified lubricants | Quantity |
| Hybrid motor input shaft spline side | CASMOLY L9508 | 0.2g |
| Engine clutch actuator reservoir | Brake fluid DOT3 | Remove air from the hydraulic line and then inject hydraulic fluid to the reservoir so that it comes between the MAX and MIN levels of the reservoir. |
Was this page helpful?