Body (Interior and Exterior)

Hood Latch Repair procedures

7steps
~42min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Replacement

  1. Remove the front bumper cover.

    (Refer to Front Bumper - "Front Bumper Cover")

  2. Disconnect the hood lower latch connector (A).

  3. Remove the engine clutch reservoir (A) after loosening the bolts.

  4. Remove the air duct (A).

  5. Disconnect the hood latch connector (A).

  6. Remove the hood lower latch assembly (A) after loosening the bolts.

    Tightening torque : 7.8 - 11,8 N·m

  7. Install in the reverse order of removal.