Hybrid Control System

Inspection mode procedures

3steps
~18min
2/5difficulty
Done 0 of 3

Procedure for entering engine forced activation mode

If the engine needs to be run constantly while the vehicle is stopped to inspect emission gas or perform maintenance on the vehicle, follow the below procedure to enter forced engine activation mode.

  1. Place the shift lever in P range while the vehicle is stopped. Engage the parking brake. Then follow the below procedure and enter forced engine activation mode.

    1. Without depressing the brake pedal, push the Engine Start/Stop button twice to enter IG ON mode.

    2. With the gear in P, depress the accelerator pedal twice.

    3. With the gear in N, depress the accelerator pedal twice.

    4. With the gear in P, depress the accelerator pedal twice.

    5. With the brake pedal depressed, push the Engine Start/Stop button to start the engine and maintain idling.

  2. “READY” lamp blinks in the Cluster when the vehicle is in forced engine activation mode. Check that the “READY” lamp blinks to ensure that the system is in forced engine activation mode.

  3. Forced engine activation mode can be cancelled by pressing the Engine Start/Stop button and switching to IG OFF mode.