Body (Interior and Exterior)

Rear Seat Back Cover Repair procedures

25steps
~155min
5/5difficulty
1special tools
Done 0 of 25

Replacement

[LH]

  1. Remove the rear seat back assembly [LH].

    (Refer to Rear Seat - "Rear Seat Assembly")

  2. Push the lock pin and remove the rear seat headrest (A).

  3. Remove the child anchor cover (A) by using a remover.

  4. Remove the rear seat latch cover (A) after loosening the cap & screws.

  5. Remove the bezel upper cover (A) by using a remover.

  6. Remove the rear seat back dust cover (A).

  7. Separate the seat back lower protector (A).

  8. Open the seat back side zipper (A).

  9. Pull out the rear seat headrest guides (A) while pinching both sides of the lower part of the guides, and remove them.

  10. Remove the rear seat back cover (A) from the rear seat back frame.

  11. Remove the seat cushion cover after removing the Velcro tape (A) and hog-ring clips (B) inside the rear seat cushion cover.

  12. Install in the reverse order of removal.

[RH]

  1. Remove the rear seat back assembly [RH].

    (Refer to Rear Seat - "Rear Seat Assembly")

  2. Remove the rear seat back armrest.

    (Refer to Rear Seat - "Rear Back Armrest")

  3. Push the lock pin, and remove the rear seat headrest (A).

  4. Remove the child anchor cover (A) by using a remover.

  5. Remove the rear seat latch cover (A) after loosening the cap & screws.

  6. Remove the bezel upper cover (A) by using a remover.

  7. Remove the rear seat back webbing guide (A) by using a remover.

  8. Remove the rear seat back dust cover (A)..

  9. Separate the seat back lower protector (A).

  10. Open the seat back side zipper (A).

  11. Pull out the rear seat headrest guides (A) while pinching both sides of the lower part of the guides, and remove them.

  12. Remove the front seat back covering (C) after removing the velcro tape (A) and hog-ring clip (B).

  13. Install in the reverse order of removal.