Body (Interior and Exterior)

Rear Seat Belt Retractor Repair procedures

4steps
~24min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement

  1. Remove the rear pillar trim.

    (Refer to Interior Trim - "Rear Pillar Trim")

  2. Remove the rear seat belt upper anchor (A) after loosening the mounting bolts.

    Tightening torque : 39.2 - 54 N·m

  3. Remove the rear seat belt retractor (A) after loosening the mounting bolt.

    Tightening torque :

    Lower : 39.2 - 54 N·m

    Upper : 7.8 - 11,8 N·m

  4. Install in the reverse order of removal.