Body (Interior and Exterior)
Repair procedures
In this manual: Body (Interior and Exterior)
8steps
~48min
2/5difficulty
Done 0 of 8
Replacement
Remove the headlamps.
(Refer to Front Bumper - "Front Bumper Cover")
Remove the side seal molding.
(Refer to Body Side Molding - "Side Sill Molding")
Remove the front wheel guard.
(Refer to Body Side Molding - "Front Wheel Guard")
Remove the front bumper side bracket (A) after loosening the screws.

Separate the hood weatherstrip (A).

Remove the fender side cover (A) after loosening the mounting clips.

After loosening the mounting screws, bolts, and nut, remove the fender assembly (A).

Install in the reverse order of removal.
Was this page helpful?