Body (Interior and Exterior)

Tailgate Assembly Repair procedures

7steps
~42min
2/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Replacement

  1. Remove the tailgate trim (A).

    (Refer to Tailgate - "Tailgate Trim")

  2. Remove the rear spoiler.

    (Refer to Body Side Molding - "Rear Spoiler")

  3. Disconnect the washer nozzle hose (A) and high mounted stop lamp connector (B).

  4. Using a screwdriver, lift the socket clips (A) up slightly on both ends of the tailgate lifter (B).

  5. Disconnect the connectors and tailgate wiring harness (A).

  6. Remove the tailgate assembly (B) after loosening the mounting bolts.

    Tightening torque : 21.6 - 26 N·m

  7. Install in the reverse order of removal.