Suspension System

TPMS Receiver Description and operation

3steps
~18min
2/5difficulty
Done 0 of 3

Operation

  1. General Function

    • Auto-learn takes place only once per Ignition cycle.

    • On successful completion, 4 road wheel sensor ID's are latched into memory for monitoring.

    • Until Auto-learn completes, previously learned sensors are monitored for under inflation / leak warnings.

  2. General Conditions to Learn New Sensors:

    • Receiver must determine that it is confident that sensor is not temporary:

    a.

    Uses vehicle speed.

    b.

    Uses confidence reduction of previously learned sensors.

    • Typical time of driving continuously at over 25 km/h to learn a new sensor is up to 20 minutes.

  3. General Conditions to Un-Learn a sensor that is removed :

    • It takes less than 20 minutes at 30 km/h.

    • Confidence reduction is dependent on time during which vehicle is driven at speed greater than or equal to 30 km/h.