Body Electrical System
Power Mirror Switch with Power Output Repair Procedures
In this manual: Body Electrical System
4steps
~24min
2/5difficulty
Done 0 of 4
Inspection
- Disconnect the negative (-) battery terminal.
- Remove the front door trim panel. (Refer to Group BD - "Front Door")
- Disconnect the connector and remove the outside rearview mirror switch (A) after removing the screws.
- Check the circuit continuity between terminals at each switch position according to the table. [Power Mirror Switch]
[Power Mirror Switch]
Test yourself
A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?