Kia Sorento XM 2011-2023 Repair Manual
Removal of Cylinder Head Cover
In this manual: Kia Sorento XM 2011-2023 Repair Manual
13steps
~78min
3/5difficulty
Done 0 of 13
- Disconnect the negative battery cable.
- Remove the engine cover.
- Remove the air duct and air cleaner assembly. (Refer to Intake and Exhaust System - "Air Cleaner")
- Disconnect the exhaust OCV (Oil Control Valve) connector (A).

- Disconnect the ignition coil connectors (A) and the fuel pump connector (B), then remove the wiring protector (C).

- Remove the ignition coils. (Refer to Engine Electrical System - "Ignition Coil")
- Disconnect the fuel hose (A) and the PCSV (Purge Control Solenoid Valve) hose (B).

- Disconnect the PCSV (Purge Control Solenoid Valve) connector (A), then loosen the vacuum piping and PCSV (Purge Control Solenoid Valve) mounting bolt and nut.

- Remove the high-pressure tube (A). (Refer to Engine Control / Fuel System - "High Pressure Fuel Pump")

- Remove the high pressure fuel pump (A) and the roller tappet (B). (Refer to Engine Control/Fuel System - "High Pressure Fuel Pump")

- Disconnect the PCV (Positive Crankcase Ventilation) hose (A).

- Remove the front engine mount (A).

- Remove the cylinder head cover (A).

Test yourself
A quick Kia Sorento Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?