Battery Cleaning

Make sure the ignition key and all accessories are in the OFF position.

Disconnect the battery cables (negative terminal first).

Remove the battery from the vehicle.

Inspect the battery tray for damage caused by electrolyte leakage. If acid damage is present, clean the area with a solution of clean warm water and baking soda. Scrub the area with a stiff brush and wipe with a cloth dampened with baking soda and water.

Clean the top of the battery with the same solution as described above.

Inspect the battery case and cover for cracks. If cracks are present, the battery must be replaced.

Clean the battery terminals with a suitable tool.

Clean the inside surfaces of the battery terminal clamps with a suitable battery terminal cleaning tool. Replace damaged or worn cables and broken terminal clamps.

Install the battery in the vehicle.

Connect the battery cable terminals to the battery posts, making sure the tops of the terminals are flush with the tops of the posts.

Tighten the terminal nuts securely.

After tightening, apply light mineral grease to all connections.