Inspection of Windshield Wiper and Washer Switch

Check the continuity between the terminals while operating the wiper and washer switch. If the condition is not normal, replace the wiper and washer switch.

Wiper Switch

Washer Switch

Rear Wiper Switch

Rear washer switch

Headlamp Washer Switch

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the lower emergency panel (A). (Refer to Body - Emergency Panel)

   

3. 3
   Remove the side cover (A) after loosening the screws.

   

4. 4
   Remove the headlamp washer switch (A).

   

5. 5
   Check that continuity exists between the terminals as shown below. If the continuity is not as specified, replace the headlamp washer switch.