Body Electrical System
Power Mirror Switch Repair Procedures
In this manual: Body Electrical System
11steps
~66min
3/5difficulty
Done 0 of 11
Removal
- Disconnect the negative (-) battery terminal.
- Remove the front left door trim. (Refer to Body - "Front Door Trim")
- Remove the power window switch assembly (A) by loosening the mounting screws (8EA).
- Remove the power window switch (A) after loosening the mounting screws (4EA).
- Remove the power mirror switch (A) after loosening the mounting screw (1EA).
Installation
- Install the power mirror switch.
- Install the front door trim after connecting the connector.
- Connect the negative (-) battery terminal.
Inspection
- Remove the front left door trim. (Refer to Body - "Front Door Trim")
- Disconnect the power mirror switch connector (A) from the door trim panel.
- Check the circuit continuity between terminals at each switch position according to the table. [Power Mirror Switch]
[Power Mirror Switch]
Test yourself
A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?