Repair Procedures

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the audio/AVN head unit assembly. (Refer to Body Electrical System - "Audio Unit") (Refer to Body Electrical System - "AVN Head Unit")
3. 3
   Remove the glove box housing assembly. (Refer to Body - "Glove Box Housing")
4. 4
   Disconnect the wiring fixing clip (A) from the BCM bracket.

   

5. 5
   Loosen the BCM unit mounting nuts.

   

6. 6
   Disconnect the connectors from the BCM (in the following order)

   

   1. Disconnect the connectors (A) in the direction of removal of the audio/AVN head unit.

      

   2. Disconnect the connectors (A) in the direction of removal of the glove box housing.

      

Installation

1. 1
   Connect the connectors and install the BCM.
2. 2
   Install the glove box housing and the audio/AVN head unit.
3. 3
   Connect the negative (-) battery terminal.

BCM Diagnosis Using GDS

1. 1
   Use the Body Control Module (BCM) to quickly diagnose the problem area by connecting to GDS to read input and output values and operate actuators.
2. 2
   To diagnose the BCM function, select the model and body control module menu.
3. 3
   Select "Input/Output Check" when checking the body network system current data. It provides the input/output status of each module.

   • BCM Data, CLU Data, SJB Data
4. 4
   To forcibly operate each module value, select "Actuation Test".

   

5. 5
   To change a user setting, select "User Settings".