Body Electrical System

Windshield Wiper and Washer Switch Repair Procedures

10steps
~60min
3/5difficulty
Done 0 of 10

Inspection

Check continuity between the terminals while operating the wiper and washer switch. If it is not in normal condition, replace the windshield wiper and washer switch.

Wiper Switch

Washer Switch

Removal

  1. Remove the lower/upper steering column shroud panel. (Refer to Body - "Steering Column Shroud Panel")
  2. Disconnect the connector (A).
  3. If the wiper and washer switch (A) must be removed, unlock the wiper switch lock with a tool without removing the steering wheel and clock spring.
  4. Remove the steering wheel. (Refer to Steering System - "Steering Wheel")
  5. Remove the clock spring. (Refer to Restraint System - "Driver Airbag (DAB) Module and Clock Spring")
  6. Remove the multifunction switch assembly (A) after loosening the 2 screws.

Installation

  1. Install the multifunction switch after connecting the connector.
  2. Install the clock spring and steering wheel.
  3. Install the upper and lower shrouds.
  4. Install the steering wheel.

Test yourself

A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.