Kia Cee'd Quiz
Body Electrical System

Repair Procedures

In this manual: Body Electrical System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
8steps
~48min
2/5difficulty
Done 0 of 8

Inspection

Check the horn by applying battery voltage to terminal 1 and grounding terminal 2. The horn should sound. If the horn does not sound, replace it. Horn Relay Inspection
  1. Remove the horn relay (A) from the relay box in the engine compartment.
  2. There should be continuity between terminals No. 30 and No. 87 when power and ground are connected to terminals No. 85 and No. 86.
  3. There should be no continuity between terminals No. 30 and No. 87 when power is disconnected.

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the under cover.
  3. Remove the mounting bolt and disconnect the horn connector, then remove the horn (A).

Installation

  1. Connect the horn connector, then install the horn.
  2. Assemble the lower cover.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.