Kia Cee'd Quiz
Manual Transmission

Shift Lever Repair Procedures

In this manual: Manual Transmission
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
8steps
~48min
2/5difficulty
0102030405013.710N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Removal

  1. Disconnect the negative (-) battery cable.
  2. Remove the shift boot (A), then remove the shift lever knob (B) by turning it counterclockwise.
  3. Remove the floor console assembly. (Refer to Body - Floor Console)
  4. Remove the bracket (A).
  5. Remove the select cable (A) from the shift lever after removing the snap pin.
  6. Remove the shift cable (B) after removing the clip (A).
  7. Remove the cable connectors (A) from the shift lever.
  8. Remove the shift lever assembly (A).

    Tightening torque: 8.8 ~ 13.7 N·m

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.