Body Control Module (Bcm) Configuration

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• When using the IDS (laptop PC)

1. 1

   Select “Module Programming”.

2. 2

   Select “Programmable Module Installation”.

3. 3

   Select “BCM/GEM”.

3. Perform the configuration according to the directions on the screen.

4. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.

• If a DTC(s) is detected, perform the applicable DTC inspection..