Glass Panel Adjustment

1. Fully close the glass panel.

2. Measure the gap and height between the glass panel and body.

• If not as specified, loosen the glass panel installation screws and reposition the glass panel.

Clearance (4SD)

• a: -2.4—0.2 mm {-0.09—0.01 in}

• b: 0 mm {0 in}

• c: -2.2—0.4 mm {-0.08—0.01 in}

• d: 0 mm {0 in}

Clearance (5HB)

• a: -2.3—0.3 mm {-0.09—0.01 in}

• b: 0 mm {0 in}

• c: -2.3—0.3 mm {-0.09—0.01 in}

• d: 0 mm {0 in}

3. Tighten the installation screws.

4. Insert a plastic card between the weatherstrip and the body of the vehicle. Verify that the sunroof is shut tightly (there is resistance when the plastic card is moved).

• If the sunroof is not shut tightly, readjust by performing Steps 2 and 3.