Body

Rear Wiper Arm And Blade Removal/Installation

6steps
~36min
2/5difficulty
Done 0 of 6

1. Remove in the order indicated in the table.



  1. Cap

  2. Nut

  3. Rear wiper arm

    (See Rear Wiper Arm Installation Note.)

  4. Rear wiper blade

  5. Rubber brush

  6. Backing plate


2. Install in the reverse order of removal.

3. Adjust the rear wiper arm and blade..

Rear Wiper Arm Installation Note

1. Clean the rear wiper arm connector shaft using a wire brush before installing the rear wiper arm.

Test yourself

A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.