Mazda 6 Quiz
Braking system

Brake pedal removal/installation

In this manual: Braking system
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. For ATX model, remove the lock unit with brake switch (R.H.D. only).

2. Remove in the order indicated in the table.



3. Install in the reverse order of removal.

Brake switch Installation Note 1. Fix the brake switch on a bracket with pressing down at 50 N {5.1 kgf·m, 37 ft·lbf}. 2. Rotate the brake switch 45°

counterclockwise.


3. Verify that the brake switch is locked securely.

Note
  • Stopper bolt and pedal stopper clearance adjustment dose not need after the brake switch is locked securely.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.