Mazda 6 Quiz
Braking system

Power brake unit removal/installation

In this manual: Braking system
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Remove the master cylinder. (See MASTER CYLINDER REMOVAL/INSTALLATION.)

2. Remove the wiper arm. (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)

3. Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION.)

4. Remove the wiper motor. (See WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION.)

5. Remove the cowl panel. (See COWL PANEL REMOVAL/INSTALLATION.)

6. For L.H.D., remove the A/C bracket.

7. For L.H.D., remove the ABS/TCS HU/CM or DSC HU/CM . (See ABS (ABS/TCS) HU/CM REMOVAL/ INSTALLATION.) (See DSC HU/CM REMOVAL/INSTALLATION.)

8. For R.H.D., remove the alternator cover.

9. For R.H.D., remove the insulator.

10. For R.H.D., remove the vacuum pipe bracket.

11. Remove in the order indicated in the table.



12. Install in the reverse order of removal.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.