Mazda 6 Quiz
Body

Door lock timer unit inspection

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Measure the voltage at the door lock timer unit terminals (other than terminal 1E and 2W) as indicated below.

  • If not as specified, inspect the parts listed under Action.

2. Disconnect the negative battery cable.

3. Disconnect the door lock timer unit connector and inspect for continuity between terminal 1E or 2W and the bracket.

4. Inspect for continuity at terminal 1E and 2W as indicated below.

5. If the parts and wiring harnesses are okay but the system still does not work properly, perform the troubleshooting.

Terminal voltage list (Reference)



*1 : Vehicles with double locking system

*2 : Vehicles with theft-deterrent system

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.