Mazda 6 Quiz
Lubrication system

Engine oil inspection

In this manual: Lubrication system
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Position the vehicle on level ground.

2. Warm up the engine to normal operating temperature.

3. Stop the engine and wait for 5 min.

4. Remove the dipstick.

5. Verify that the oil level is between the F and L marks on the dipstick and check the engine oil condition.

  • If the oil level is below the L mark, add the oil.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.