Mazda 6 Quiz
Body

Front door key cylinder removal/installation

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Remove the front door unit.

2. Remove the cover, then remove the bolt.


3. For protector-equipped vehicles, pull out the protector tab from the latch and remove the protector.


4. Disconnect the rod.

5. Remove the front outer handle.

6. Turn the key cylinder in the direction indicated by the arrow (1) and move the hook to the notch.


7. Pull the key cylinder towards you (2) to remove it.

8. Install in the reverse order of removal.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.