Mazda 6 Quiz
Suspension

Front shock absorber inspection

In this manual: Suspension
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Remove the front shock absorber from the vehicle.

2. Inspect for damage and oil leakage.

3. Inspect the rubber bushing for deterioration and wear.

4. Compress and extend the shock piston at least three times. Verify that the operational force does not change and that there is no unusual noise.

  • If not as specified, replace the shock absorber.

(1) Compress the shock absorber piston and release it.

(2) Verify that the piston extends fully at a normal speed.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.