Mazda 6 Quiz
Body

Rear side seat belt removal/installation

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read
Caution
  • The ELR has a spring that will unwind if the retractor's cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.
4SD

1. Fold the rear seat back.

2. Remove the rear side seats.

3. Remove the rear package trim.

4. Remove the bolts.


5. Remove the rear seat belt.

6. Install in the reverse order of removal.

5HB Note
  • Rear side seat belts are embedded in the rear seat back. See rear seat disassembly/assembly, remove/install the rear center seat belt.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.