Mazda 6 Quiz
Automatic transaxle

Selector cable adjustment

In this manual: Automatic transaxle
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Remove the center console.

2. Shift the selector lever to P position.

3. Unlock the lock piece of the selector cable (selector lever side) in the order shown in the figure.


4. Verify that the manual shaft is in P position.

5. Lock the lock piece of the selector cable (selector lever side) in the order shown in the figure.


6. Install the center console.

7. Shift the selector lever from P position to L range, and make sure that there are no other components in that area to interfere with the lever.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.