Mazda 6 Quiz
Automatic transaxle

Selector lever inspection

In this manual: Automatic transaxle
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Turn the ignition switch to ON (engine OFF).

2. With the brake pedal depressed, verify that there is a "click" at each range when shifted.

3. Verify that the selector lever can be shifted.

4. Verify that there is a "click" at each position when shifted from P position to L range.


5. Verify that the positions of the selector lever and the indicator are aligned.

  • If not as specified, adjust the TR switch.(See TRANSAXLE RANGE (TR) SWITCH ADJUSTMENT.)

6. Verify that the vehicle operates in each selected range.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.