1. Pry the side protector end 20-30 mm {0.8-1.1 in}
using a flathead screwdriver or a razor.
Warning
Using a razor with bare hands can cause injury. Always wear gloves when using a razor.
Note
The side protector is installed with double-sided adhesive tape. If the side protector is difficult to remove, soften the double-sided adhesive tape using a hot air blower.
2. Pull the side protector toward you, then remove it.
?
Test yourself
A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.
