Adjusting the multicontour seat. Adjusting the 4-way lumbar support. Folding seat bench in cargo area (T-Model)

The Mercedes E-Class (4th generation, W212, 2009–2016) offers individually adjustable multicontour seats that support the back optimally and enhance driving comfort. The 4-way lumbar support also allows precise adjustment to the spine and helps prevent fatigue on long journeys. The integrated folding seat bench is especially practical on the T-Model, providing additional flexibility in the cargo area.

Adjusting the Multicontour Seat

	Adjusting the thigh support
	Adjusting the lumbar backrest contour
	Adjusting the upper backrest contour
	Adjusting the side bolsters of the backrest

To support the spine and lateral support, you can individually adjust the seat contour of the front seat.

Turn the key in the ignition lock to position 2.

Adjusting the Active Multicontour Seat

You can adjust the active multicontour seat with COMAND Online or Audio 20. For more information, refer to the separate COMAND Online or Audio 20 Operator's Manual.

Adjusting the 4-Way Lumbar Support

	Raise the backrest contour
	Reduce the backrest contour
	Lower the backrest contour
	Increase the backrest contour

To support the spine, you can individually adjust the backrest contour of the front seats.

Folding Seat Bench in Cargo Area (T-Model)

Important Safety Notes

WARNING

If the backrests of the rear seat bench are not upright and locked, the backrest of the folding seat bench can fold forward while driving. As a result, the seat belts cannot protect as intended. There is an increased risk of injury!

Make sure the backrests of the rear seat bench are upright and locked.

The folding seat bench in the cargo area is only approved for persons up to 1.40 m (4 ft 7 in) tall and a maximum body weight of 50 kg (110 lb).

Observe the loading guidelines.

The maximum occupant weight can be reduced by

• extensive optional equipment
• Loading the Vehicle
• Towing a trailer

When using the folding seat bench, the double roller blind must be installed.

Folding Out the Folding Seat Bench

Make sure the backrests of the rear seat bench are upright and locked.

Move the handle of the double roller blind upward.

Pull the release handlepull and fold the backrest of the folding seat bench upward.

Insert the seat belts into the holders.

Pull the release handlepull and fold the seat cushion of the folding seat bench into the seating position.

Press the seat cushion all the way down until the backrest is correctly locked in place.

Fold the head restraints up.

Removing and Installing the Seat Cushion

If you need to lift the cargo area floor, e.g. to change a tire, you must remove the seat cushion.

Removing: Fold the seat cushionup and lift it out of the seat cushion guide.

Installing the seat cushionat a slight angle from the rearinto the seat cushion guidepush it in.

The seat cushionto the original positionFold it back until it locks into place.

Fold back the fold-down bench seat

Pull the seat cushion up by the taband fold it back to its original position until it clicks into place.

Press the release buttonPress and fold the head restraints down.

NOTE

To avoid damage, you must push the head restraints fully into their guides and engage the seat belt buckles in their guides.

Press the release buttonPress and push the head restraints fully in.

The backrestof the folding seat bench back to the original position until it locks into place.

The multicontour seats of the Mercedes E-Class W212 (model years 2009–2016) offer maximum comfort and ergonomics. The many adjustment options allow you to optimally adapt the seat contour and support, which is especially advantageous on long journeys.

The fold-down bench seat in the estate model also demonstrates the versatility of the E-Class BR 212. It provides practical seating in the cargo area and meets the highest safety requirements for children and lighter occupants.

These features underline the E-Class's aim of combining comfort and safety perfectly.