Instruments and controls

Warning/indicator lights (other)

~3min read

Mitsubishi Outlander Automatic High Beam indicator light symbol Automatic High Beam [AHB] indicator light (if so equipped)

The Automatic High Beam [AHB] indicator light illuminates when the AHB system is switched on and available for operation. The system automatically manages high-beam use according to the applicable driving conditions.

Mitsubishi Outlander white Brake Auto Hold standby indicator light Brake Auto Hold indicator light (white)

The white Brake Auto Hold indicator light illuminates when the system is switched on and standing by, but is not currently holding the Mitsubishi Outlander stationary.

Mitsubishi Outlander green Brake Auto Hold active indicator light Brake Auto Hold indicator light (green)

The green Brake Auto Hold indicator light illuminates while the system is actively maintaining brake pressure and holding the vehicle stationary.

Mitsubishi Outlander exterior lighting indicator symbol Exterior light indicator

This indicator illuminates when the headlight switch is set to AUTO, if equipped, Mitsubishi Outlander parking light switch position symbol or Mitsubishi Outlander headlight switch position symbol position and the front parking lights, tail lights, license plate lights or headlights are operating. The indicator turns off when the applicable exterior lights are switched off.

Mitsubishi Outlander front fog light indicator symbol Front fog light indicator light (if so equipped)

The front fog light indicator illuminates whenever the Mitsubishi Outlander front fog lights are switched on.

Mitsubishi Outlander high beam headlight indicator symbol High beam indicator light

This indicator illuminates while the headlight high beams are operating and turns off when the headlights return to low beam.

Mitsubishi Outlander low beam headlight indicator symbol Low beam indicator light

This indicator illuminates while the headlight low beams are operating and turns off when the high beams are selected.

Mitsubishi Outlander turn signal and hazard warning indicator arrows Turn signal/hazard indicator lights

The indicator arrows flash when the turn signal lever is operated or when the hazard warning flasher switch is turned on.

Audible reminders

Light reminder chime

The light reminder chime sounds when the driver's door is opened while the headlight switch is in the Mitsubishi Outlander parking light switch position or Mitsubishi Outlander headlight switch position position and the ignition switch is in the OFF position.

Switch the exterior lights off before leaving the Mitsubishi Outlander to prevent unnecessary battery discharge.

Driving aid chimes

An audible warning or chime may sound while any of the following driver assistance systems is active, if the vehicle is equipped with the applicable feature:

  • Forward Collision Mitigation System [FCM]
  • Predictive Forward Collision Warning [PFCW]
  • Blind Spot Warning [BSW]
  • Active Blind Spot Assist [ABSA]
  • Rear Cross Traffic Alert [RCTA]
  • Lane Departure Prevention [LDP]
  • Lane Departure Warning [LDW]
  • MI-PILOT Assist
  • Rear Automatic Emergency Braking [Rear AEB]
  • Parking sensor system

Door lock warning chime

If the door lock warning chime sounds, check the Mitsubishi Outlander and the keyless operation transmitter to determine which condition is preventing normal locking.

Brake pad wear warning

The disc brake pads are equipped with audible wear indicators that help alert the driver when replacement may be required.

When a brake pad reaches its wear limit, a high-pitched scraping sound may be heard while the vehicle is moving. At first, the sound may occur only when the brake pedal is pressed. As wear progresses, the noise may become continuous even when the brake pedal is not being applied. Have the brake system inspected as soon as possible whenever this warning sound is heard.