Engine

Accelerator Control System. Accelerator Control System

~1min read

Accelerator Control System

Exploded View

Accelerator pedal assembly Accelerator pedal bracket
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)

Removal and Installation

REMOVAL

Disconnect accelerator pedal harness connector as follows.Slide the connector lock to upward (1).

Remove the accelerator pedal harness connector to upward (2) with pushing in the connector lock.

Remove the mounting bolts, and remove accelerator pedal assembly.

If necessary remove mounting nut, and remove accelerator pedal bracket.

INSTALLATION

Note the following, and install in the reverse order of removal.

  • Install the protrusion of the bracket into the locating hole of the accelerator pedal assembly before tightening the accelerator pedal assembly mounting bolts.

    : Locating pin

Inspection

INSPECTION AFTER INSTALLATION

  • Check accelerator pedal moves smoothly within the whole operation range when it is fully depressed and released.

  • Check accelerator pedal securely returns to the fully released position.