Restraints
Configuration (air Bag Diagnosis Sensor Unit)
In this manual: Restraints
4steps
~24min
2/5difficulty
Done 0 of 4
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the air bag diagnosis sensor unit.
CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the air bag diagnosis sensor unit. Refer to Work Procedure.
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to air bag diagnosis sensor unit according to "Replace ECU" in "CONSULT Operation Manual".
>>GO TO 2
CHECK ALL ECU SELF-DIAGNOSIS RESULTS
With CONSULT
Erase all ECU self-diagnosis results using CONSULT.
Ignition switch OFF.
Ignition switch ON.
Check that all ECU self-diagnosis results have no DTC.
WORK END
Was this page helpful?