Maintenance. Maintenance Procedures

Engine Oil

~2min read

Draining

Warm up the engine, and check for engine oil leakage from engine components. Refer to Inspection.

Stop the engine and wait for 10 minutes.

Loosen oil filler cap.

Remove engine under cover using a power tool (commercial service tool). Refer to Removal and Installation.

Remove drain plug and then drain engine oil.

Refilling

Install drain plug with new washer. Refer to Exploded View.

Refill with new engine oil.

Engine oil specification and viscosity: Refer to Fluids and Lubricants.

Engine oil capacity : Refer to ENGINE OIL.

Warm up the engine and check area around drain plug and oil filter for engine oil leakage.

Stop the engine and wait for 10 minutes.

Check the engine oil level. Refer to Inspection.

Perform the “Engine Oil Data Reset”. Refer to Work Procedure.