Transmission & Driveline
Noise, Vibration and Harshness (nvh) Troubleshooting
In this manual: Transmission & Driveline
~1min read
NVH Troubleshooting Chart
Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts.
| Possible cause and SUSPECTED PARTS | Symptom | Reference | ||
|---|---|---|---|---|
| Vibration | Shake | Noise | ||
| Uneven rotating torque | × | × | Inspection | |
| Center bearing improper installation | × | × | × | — |
| Excessive center bearing axial end play | × | × | — | |
| Center bearing mounting (insulator) cracks, damage or deterioration | × | × | — | |
| Excessive joint angle | × | × | × | Inspection |
| Rotation imbalance | × | × | Inspection | |
| Excessive runout | × | × | Inspection | |
| DIFFERENTIAL | × | NVH of FRONT and REAR FINAL DRIVE in this section. | ||
| AXLE AND SUSPENSION | × | × | × | NVH in FAX, RAX, FSU, and RSU section. |
| TIRE | × | × | × | NVH in WT section. |
| ROAD WHEEL | × | × | NVH in WT section. | |
| DRIVE SHAFT | × | × | × | NVH in FAX and RAX section. |
| BRAKE | × | × | NVH in BR section. | |
| STEERING | × | × | × | NVH in ST section. |
×: Applicable
Was this page helpful?