Brakes
Parking Brake Control
In this manual: Brakes
~1min read
Exploded View

| Rear brake caliper assembly | Axle housing | Bracket | |||
| Parking brake actuator harness and rear wheel sensor | |||||
| : vehicle front | |||||
| : N·m (kg-m, ft-lb) | |||||
| : N·m (kg-m, in-lb) | |||||
Removal and Installation
REMOVAL
Turn the ignition switch ON.
Release the parking brake.
Turn the ignition switch OFF.
Disconnect 12V battery negative terminal. Refer to Removal and Installation.
Remove rear tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Disconnect parking brake actuator harness and rear wheel sensor harness connectors.
Remove parking brake actuator harness and rear wheel sensor harness mounting bolts and bracket.
Remove parking brake actuator harness and rear wheel sensor harness from the vehicle.
INSTALLATION
Install the reverse order of the removal.
Was this page helpful?