Parking Brake Does Not Release
Description
When the electric parking brake cannot be released by the parking brake switch or automatically releasing, following procedure can be released.
Diagnosis Procedure
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “ABS”.
Is DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK REAR DISC BRAKE DRAG
Check if the rear disc brake is dragging. Refer to Inspection and Adjustment.
Is the rear disc brake dragging?
YES>>Check the rear disc brake system. Refer to Inspection.
NO>>GO TO 3.
DISCONNECT PARKING BRAKE ACTUATOR HARNESS CONNECTOR
Disconnecting the 12V battery negative terminal.
Disconnect parking brake actuator harness connector
from rear brake caliper assembly
.
GO TO 4.
REMOVE PARKING BRAKE ACTUATOR
Remove parking brake actuator
from rear brake caliper assembly
.

GO TO 5.
RELEASE OF PARKING BRAKE
Rotate the rear brake caliper assembly
spindle part
clockwise.

Is the parking brake released?
YES>>GO TO 6.
NO>>Check the rear brake caliper assembly. Refer to Inspection.
REPLACE REAR BRAKE CALIPER ASSEMBLY
Replace the rear brake caliper assembly. Refer to Removal and Installation.
>>End of work.