Body Exterior, Doors, Roof & Vehicle Security
Power Window Main Switch
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~1min read
Removal and Installation
REMOVAL
Remove front door finisher LH. Refer to Removal and Installation.
Disconnect power window main switch harness connector and door lock and unlock switch harness connector.
Remove front door squawker LH from front door finisher LH (if equipped). Refer to Removal & Installation.
Remove front armrest LH fixing screws
, and then remove front armrest LH
from front door finisher LH
.

| : Pawl |
Remove power window main switch fixing screws
, and then remove power window main switch
from front armrest LH
.

| : Pawl |
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?