Repairing Material
Foam Repair
During factory body assembly, foam insulators are installed in certain body panels and locations around the vehicle. Use the following procedure(s) to replace any factory-installed foam insulators.
URETHANE FOAM APPLICATIONS
Use commercially available Urethane foam for sealant (foam material) repair of material used on vehicle.
| <Urethane foam for foaming agent> | 3M™ Automix™ Flexible Foam 08463 or equivalent |
Read instructions on product for fill procedures.
Example of foaming agent filling operation procedure
Fill procedures after installation of service part.Eliminate foam material remaining on vehicle side. Clean area after eliminating form insulator and foam material. Install service part. Insert nozzle into hole near fill area and fill foam material or fill enough to close gap with the service part.

| Urethane foam | |
| Nozzle insert hole | |
| : vehicle front | |
Fill procedures before installation of service part.Eliminate foam material remaining on vehicle side. Clean area after eliminating foam insulator and foam material. Fill foam material on wheelhouse outer side.

| Urethane foam | |
| Fill while avoiding flange area | |
| : vehicle front | |