Body Exterior, Doors, Roof & Vehicle Security
Location of Plastic Parts
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~8min read
Precautions for Plastics
| Abbreviation | Material name | Heat resisting temperature °C (°F) | Resistance to gasoline and solvents | Other cautions |
|---|---|---|---|---|
| PE | Polyethylene | 60 (140) | Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly). | Flammable |
| ABS | Acrylonitrile Butadiene Styrene | 80 (176) | Avoid gasoline and solvents. | — |
| AES | Acrylonitrile Ethylene Styrene | 80 (176) | ↑ | — |
| EPM/EPDM | Ethylene Propylene (Diene) copolymer | 80 (176) | Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly). | Flammable |
| PS | Polystyrene | 80 (176) | Avoid solvents. | Flammable |
| PVC | Poly Vinyl Chloride | 80 (176) | Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly). | Poisonous gas is emitted when burned. |
| TPO | Thermoplastic Olefine | 80 (176) | ↑ | Flammable |
| AAS | Acrylonitrile Acrylic Styrene | 85 (185) | Avoid gasoline and solvents. | — |
| PMMA | Poly Methyl Methacrylate | 85 (185) | ↑ | — |
| EVAC | Ethylene Vinyl Acetate | 90 (194) | ↑ | — |
| PP | Polypropylene | 90 (194) | Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly). | Flammable, avoid battery acid. |
| PUR | Polyurethane | 90 (194) | Avoid gasoline and solvents. | — |
| UP | Unsaturated Polyester | 90 (194) | ↑ | Flammable |
| ASA | Acrylonitrile Styrene Acrylate | 100 (212) | ↑ | Flammable |
| PPE | Poly Phenylene Ether | 110 (230) | ↑ | — |
| TPU | Thermoplastic Urethane | 110 (230) | ↑ | — |
| PBT+ PC | Poly Butylene Terephthalate + Polycarbonate | 120 (248) | ↑ | Flammable |
| PC | Polycarbonate | 120 (248) | ↑ | — |
| POM | Poly Oxymethylene | 120 (248) | ↑ | Avoid battery acid. |
| PA | Polyamide | 140 (284) | ↑ | Avoid immersing in water. |
| PBT | Poly Butylene Terephthalate | 140 (284) | ↑ | — |
| PAR | Polyarylate | 180 (356) | ↑ | — |
| PET | Polyethylene terephthalate | 180 (356) | ↑ | — |
| PEI | Polyetherimide | 200 (392) | ↑ | — |
Location of Plastic Parts
EXTERIOR
FOR PRO-4X GRADE

| Component | Material | Component | Material | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Door mirror cover | ABS | Rear spoiler | Upper | PC + ABS | |||||
| Door mirror finisher | ABS | Lower | ASA | ||||||
| Door mirror housing assembly | ABS | Roof antenna | Without ProPILOT Assist 2.1 models | Inner cover | PC + ABS | ||||
| Door mirror base cover | ABS | Pad | EPDM | ||||||
| Door mirror base gasket | PE | Antenna cover | ASA, PC / ABS | ||||||
| Door mirror base assembly | ABS | With ProPILOT Assist 2.1 models | Inner cover | PC + ASA | |||||
| Side turn signal lamp | Lens | PMMA | Pad | TPE | |||||
| Housing | ABS | Mold base | PBT | ||||||
| Inner lens | PMMA | Antenna cover | PC + ABS | ||||||
| With roof rail models | Roof rail | PC + PET | Rear side spoiler | ABS | |||||
| Roof rail cover | PC + ABS | Side window glass molding | Stainless | ||||||
| Without roof rail models | Roof side molding | Molding | Stainless + PVC | Side window glass finisher | AES | ||||
| End cap | PC + ASA | Fuel filler lid | PPE, PA | ||||||
| Front pillar finisher | PC, ABS | Fuel filler base assembly | PP + Glass fiber | ||||||
| Front fender duct | Base | ABS | Front and rear door outside molding | Molding | Stainless + TPO | ||||
| Molding | ABS | End cap | PBT | ||||||
| Front combination lamp | Lens | PC | Front and rear door outside handle | Cover | PC + PET | ||||
| Housing | PP | Body | PP + Glassfiber | ||||||
| Inner lens | PC | Escutcheon cover | PP + Glassfiber | ||||||
| Inner Panel | PC | Front gasket | PP | ||||||
| Front grille | Grille | ABS | Rear gasket | TPO | |||||
| Molding | ABS | Front and rear door outside handle bracket | PA + Glassfiber | ||||||
| Front bumper finisher | PP + EPM | Rear bumper fascia | PP + EPM | ||||||
| Front bumper fascia | PP + EPM | Rear bumper finisher upper | PP + EPM | ||||||
| License plate bracket | PP + EPM | Rear bumper finisher lower | PP | ||||||
| Front bumper side finisher | ABS | Rear bumper molding | PP + EPM | ||||||
| Front fog lamp | Lens | PC | Rear combination lamp | Lens | PMMA | ||||
| Housing | PC + PBT | Housing | ASA | ||||||
| Inner lens | PMMA | Inner lens | PMMA | ||||||
| Fender protector | PP | Rear combination lamp cover | ASA | ||||||
| Front fillet molding (If equipped) | PP + EPM | Back door finisher upper | Outer | ABS | |||||
| Side step | Cover | PP + EPM | Inner | ASA | |||||
| Reinforcement | Aluminum | Rear reflex reflector | Lens | PMMA | |||||
| Rear fillet molding front (If equipped) | PP + EPM | Housing | PC + ABS | ||||||
| Rear fillet molding rear (If equipped) | PP + EPM | License plate lamp | Lens | PMMA | |||||
| Rear wheelhouse protector | PET + PP | Housing | ABS + PC | ||||||
| High-mounted stop lamp | Lens | PMMA | Back door finisher | Outer | ABS | ||||
| Housing | ABS | Inner | ASA | ||||||
EXCEPT FOR PRO-4X GRADE

| Component | Material | Component | Material | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Door mirror cover | ABS | Roof antenna | Without ProPILOT Assist 2.1 models | Inner cover | PC + ABS | ||||
| Door mirror finisher | ABS | Pad | EPDM | ||||||
| Door mirror housing assembly | ABS | Antenna cover | ASA, PC / ABS | ||||||
| Door mirror base cover | ABS | With ProPILOT Assist 2.1 models | Inner cover | PC + ASA | |||||
| Door mirror base gasket | PE | Pad | TPE | ||||||
| Door mirror base assembly | ABS | Mold base | PBT | ||||||
| Side turn signal lamp | Lens | PMMA | Antenna cover | PC + ABS | |||||
| Housing | ABS | Rear side spoiler | ABS | ||||||
| Inner lens | PMMA | Side window glass molding | Stainless | ||||||
| With roof rail models | Roof rail | PC + PET | Side window glass finisher | AES | |||||
| Roof rail cover | PC + ABS | Fuel filler lid | PPE, PA | ||||||
| Without roof rail models | Roof side molding | Molding | Stainless + PVC | Fuel filler base assembly | PP + Glass fiber | ||||
| End cap | PC + ASA | Front and rear door outside molding | Molding | Stainless + TPO | |||||
| Front pillar finisher | PC, ABS | End cap | PBT | ||||||
| Front fender duct | Base | ABS | Front and rear door outside handle | Cover | PC + PET | ||||
| Molding | ABS | Body | PP + Glassfiber | ||||||
| Front combination lamp | Lens | PC | Escutcheon cover | PP + Glassfiber | |||||
| Housing | PP | Front gasket | PP | ||||||
| Inner lens | PC | Rear gasket | TPO | ||||||
| Inner Panel | PC | Front and rear door outside handle bracket | PA + Glassfiber | ||||||
| Front grille | Grille | ABS | Rear bumper fascia | PP + EPM | |||||
| Molding | ABS | Rear bumper finisher upper | PP + EPM | ||||||
| Front bumper grille | PP + EPM | Rear bumper finisher lower | PP | ||||||
| Front bumper side grille | Grille | PP + EPM | Rear bumper molding | PP + EPM | |||||
| Molding | ABS | Rear combination lamp | Lens | PMMA | |||||
| Front bumper fascia | PP + EPM | Housing | ASA | ||||||
| License plate bracket | PP + EPM | Inner lens | PMMA | ||||||
| Front bumper side finisher | ABS | Rear combination lamp cover | ASA | ||||||
| Front fog lamp | Lens | PC | Tail lamp | Lens | PMMA | ||||
| Housing | PC, ABS | Housing | ASA | ||||||
| Inner lens | PC | Inner lens | PMMA | ||||||
| Fender protector | PP | Rear reflex reflector | Lens | PMMA | |||||
| Side step | Cover | PP + EPM | Housing | PC + ABS | |||||
| Reinforcement | Aluminum | License plate lamp | Lens | PMMA | |||||
| Rear wheelhouse protector | PET + PP | Housing | ABS + PC | ||||||
| High-mounted stop lamp | Lens | PMMA | Back door finisher | Outer | ABS | ||||
| Housing | ABS | Inner | ASA | ||||||
| Rear spoiler | Upper | PC + ABS | — | — | — | ||||
| Lower | ASA | ||||||||
INTERIOR

| Component | Material | Component | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Luggage room lamp | Lens | PC | Instrument pad A | Core | PC + ABS | ||||||
| Housing | PA + Glassfiber | Skin | PVC | ||||||||
| Inner lens | PC | Switch bracket | PC + ABS | ||||||||
| Back pillar garnish | PP | Instrument pad B | Core | PC + ABS | |||||||
| Luggage side lower finisher | Base | PP | Skin | PVC | |||||||
| Pad | PP + PET | Instrument lower panel LH | PC + ABS | ||||||||
| Rear pillar finisher | Core | PP | Center instrument lower panel | Core | PC + ABS | ||||||
| Skin | PET, PUR | Skin | PVC | ||||||||
| Center pillar upper garnish | Core | PP | Instrument pad D | Core | PC + ABS | ||||||
| Skin | PET, PUR | Skin | PVC | ||||||||
| Center pillar lower garnish | PP | Glove box assembly | Inner lid | PC + ABS | |||||||
| Map lamp assembly | Console | PP | Outer lid | PC + ABS | |||||||
| Lid | PC + ASA | Skin | PVC | ||||||||
| Lens | PC | Body | PC + ABS | ||||||||
| Cover | PP | Instrument lower cover | PP | ||||||||
| Map lamp bracket | PC + ABS | Front center console switch finisher assembly | Molding | PC + ABS | |||||||
| Front pillar garnish | Core | PP | Center ventilator | Case | ABS | ||||||
| Skin | PET, PUR | Louver | ABS, PBT + PET + Glassfiber | ||||||||
| Dash side finisher | PP | Knob | POM | ||||||||
| Front speaker grille | PP + EPM | Escutcheon | ABS | ||||||||
| Display unit cover | PP + EPM | A/C finisher | PC | ||||||||
| Instrument panel assembly | Core | PP + Glassfiber | Front center console bracket | PP + Glassfiber | |||||||
| Skin | PVC | Instrument lower cover LH & RH | PP | ||||||||
| Instrument mask | PP | Front center console side finisher upper | Core | PC + ABS | |||||||
| Display unit finisher LH | PC + ABS | Skin | PVC | ||||||||
| Display unit finisher RH | PC + ABS | Front center console side finisher lower | PP + EPM | ||||||||
| Cluster lid A | PP | Front center console cup holder assembly | Finisher | PC + ABS | |||||||
| Steering column cover upper & lower | PP + EPM | Base | PC + ABS | ||||||||
| Instrument finisher A | Finisher | PC + ABS | Tray | PA + Glassfiber | |||||||
| Side ventilator | Case | ABS | Cup holder | PP | |||||||
| Louver | ABS, PBT + PET + Glassfiber | Console pocket | PP | ||||||||
| Knob | POM | Sub tray | ABS | ||||||||
| Escutcheon | ABS | Front center console body assembly | Body | PP + Glassfiber | |||||||
| Instrument finisher B | Finisher | PC + ABS | Panel | PP + EPM | |||||||
| Side ventilator | Case | ABS | Lid skin | PVC | |||||||
| Louver | ABS, PBT + PET + Glassfiber | Lid pad | PUR | ||||||||
| Knob | POM | Lid core | ABS | ||||||||
| Escutcheon | ABS | Front center console rear finisher assembly | Upper | PC + ABS | |||||||
| Instrument finisher C | PP + EPM | Lower | PP + EPM | ||||||||
Was this page helpful?