Body Interior
Third Seat Lh Position Initialization
In this manual: Body Interior
9steps
~54min
2/5difficulty
Done 0 of 9
Description
Perform the third seat LH position initialization when the following conditions are performed. For details, refer to Work Procedure.
- Replacing third seat control unit LH.
- Replacing third seat LH.
- Manual function and folding function of third seat LH does not operate normally.
Work Procedure
CHOOSE METHOD
There are two ways of initialization method.
Which method do you choose?
With CONSULT>>GO TO 2.
Without CONSULT>>GO TO 3.
WITH CONSULT
With CONSULT
- Ignition switch ON.
- Perform "Third seat LH position initialization" in "Work support" mode of "THIRD SEAT RH" using CONSULT.
GO TO 4.
WITHOUT CONSULT
Without CONSULT
- Stop the vehicle and start the engine.
- Press the reclining switch LH (forward).
- Press the reclining switch LH (backward) within 1 second.
- Press the reclining switch LH (forward) within 1 second.
- Press the reclining switch LH (backward) within 1 second.
- After repeating steps 4 and 5 three times, release the reclining switch LH.
- After initialization is complete, the buzzer sounds twice.
GO TO 4.
CHECK THE FUNCTION
Check that manual function and folding function operates normally.
>>WORK END
Was this page helpful?