Body Interior

Front Seat

~5min read

Exploded View

REMOVAL

Headrest

Front seat assembly

(passenger seat)

Front seat assembly

(driver seat)
Seat leg cover
: Pawl
: N·m (kg-m, ft-lb)

DISASSEMBLY

Driver Seat

WITH 8WAY POWER SEAT SYSTEM

Headrest holder (lock) Headrest holder (free) Seatback trim
Seatback pad Seat cushion trim Seat cushion pad
Inside seat cushion finisher outer Inside seat cushion finisher inner Inside slide finisher
Sliding motor cover Seat cushion suspension Seat cushion blower motor*1
Seat cushion harness bracket Driver seat control unit*2 Outside slide finisher
Seat cushion trim bracket Power seat switch Lumbar support switch*3
Lumbar support switch*4 Sliding switch knob Reclining switch knob
Outside seat cushion finisher outer Massage switch*5 Outside seat cushion finisher inner
Front side air bag module Seat frame assembly Lumbar support unit*4
Seatback board Seatback blower motor*1 Lumbar support unit*3
Seatback suspension*6 Front center air bag module*5
: Clip
: Pawl
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
, , : Indicates that the part is connected at points with same symbol in actual vehicle.

*1: With front heater and ventilation seat system

*2: With automatic drive positioner system

*3: With 2way lumbar support system

*4: With 4way lumbar support system

*5: With front center air bag module

*6: Without lumbar support system

Passenger Seat

WITH 4WAY POWER SEAT SYSTEM

Seatback board Seatback suspension*1 Front side air bag module
Outside seat cushion finisher outer Reclining switch knob Sliding switch knob
Lumbar support switch*2 Power seat switch Seat cushion trim bracket
Outside seat cushion finisher inner Seat cushion suspension Seat cushion harness bracket
Occupant detection system control unit Sliding motor cover Seat frame assembly
Inside seat cushion finisher inner Inside seat cushion finisher outer Seat cushion pad
Seat cushion trim Seatback pad Seatback trim
Headrest holder (lock) Headrest holder (free) Lumbar support unit*2
: Clip
: Pawl
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
: Indicates that the part is connected at points with same symbol in actual vehicle.

*1: Without 2way lumbar support system

*2: With 2way lumbar support system

WITH 8WAY POWER SEAT SYSTEM

Seatback board Lumbar support unit Reclining switch knob
Sliding switch knob Outside seat cushion finisher outer Lumbar support switch
Massage switch* Outside seat cushion finisher inner Front side air bag module
Power seat switch Seat cushion trim bracket Outside slide finisher
Seat cushion suspension Seat cushion blower motor Seat cushion harness bracket
Occupant detection system control unit Passenger seat control unit* Sliding motor cover
Seat frame assembly Inside slide finisher Inside seat cushion finisher inner
Inside seat cushion finisher outer Seat cushion pad Seat cushion trim
Seatback pad Seatback trim Headrest holder (lock)
Headrest holder (free) Seatback blower motor
: Clip
: Pawl
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
: Indicates that the part is connected at points with same symbol in actual vehicle.

*: With massage function

Removal and Installation

REMOVAL

Remove headrest.

Slide front seat to front most position.

Disengage fixing pawls using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove seat leg covers.

: Pawl

Remove rear side mounting bolts of front seat assembly.

Slide front seat to rear most position.

Fully lift down front seat (with 8way power seat system).

Remove front side mounting bolts of front seat assembly.

Disconnect battery negative terminal.

Pull up front seat to rearward.

Disengage body harness fixing clips, and then disconnect harness connectors.

Remove front seat assembly from vehicle.

INSTALLATION

Note the following items, and then install in the reverse order of removal.