Wiper & Washer
Diagnosis system (BCM) (with intelligent key system)
In this manual: Wiper & Washer
~1min read
Common item
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.

NOTE:
• *1: This item is displayed, but not used.
• *2: For models with automatic A/C, this diagnosis mode is not used.
FREEZE FRAME DATA (FFD)
The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on CONSULT-III.

Wiper
WIPER : CONSULT-III Function - WIPERWORK SUPPORT

*1: The item is indicated, but not operated on model with rain sensor *2: The item is indicated, but not operated on model without rain sensor *3: Factory setting
DATA MONITOR

ACTIVE TEST

Was this page helpful?