Wiper & Washer
Diagnosis system (bcm) (without intelligent key system)
In this manual: Wiper & Washer
~1min read
Common item
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.

• *1: This item is displayed, but is not used.
• *2: For models with automatic A/C, this mode is not used.
Wiper
WIPER : CONSULT-III Function (BCM - WIPER)WORK SUPPORT

*1: The item is indicated, but not operated on model with rain sensor *2: The item is indicated, but not operated on model without rain sensor *3: Factory setting
DATA MONITOR

*: The item is displayed but is not monitored on model without rain sensor ACTIVE TEST

Was this page helpful?