Interior Lighting System
Diagnosis system (BCM) (without intelligent key system)
In this manual: Interior Lighting System
~1min read
Common item
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.

*: This item is not used.
FREEZE FRAME DATA (FFD)
The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on CONSULT-III.

INT lamp
INT LAMP : CONSULT-III Function (BCM - INT LAMP)
WORK SUPPORT


*: Factory setting
DATA MONITOR

ACTIVE TEST

Battery saver
BATTERY SAVER : CONSULT-III Function (BCM - BATTERY SAVER)WORK SUPPORT


*:Factory setting
DATA MONITOR

ACTIVE TEST

*: Each lamp switch is in ON position.
Was this page helpful?