Interior Lighting System

System

In this manual: Interior Lighting System
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~5min read

Interior room lamp control system

INTERIOR ROOM LAMP CONTROL SYSTEM : System Diagram
INTERIOR ROOM LAMP CONTROL SYSTEM : System Description

INTERIOR ROOM LAMP CONTROL SYSTEM : System Description

OUTLINE

• Interior room lamps* are controlled by interior room lamp timer control function of BCM. *: Map lamp (when map lamp switch is in DOOR position). • Luggage room lamp is controlled by luggage room lamp control function of BCM.

• Push-button ignition switch illumination is controlled by the push-button ignition switch illumination control function of BCM.(With Intelligent Key)

INTERIOR ROOM LAMP TIMER CONTROL

Interior Room Lamp Timer Basic Operation

• The interior room lamp turns ON and OFF (gradual brightening and dimming)

• The interior room lamp turns ON and OFF (gradual brightening and dimming) by the interior room lamp timer.

• BCM judges the vehicle condition with the following items. It activates the interior room lamp timer.

- Ignition switch status*1 - Door switch signal (except back door) - Door lock/unlock signal (Remote keyless entry receiver, each door request switch*1, door lock and unlock switch)
- Key switch signal*2

*1:With Intelligent Key *2:Without Intelligent Key

NOTE

:
Each function of interior room lamp timer can be set by CONSULT-III. Refer to INL-12, "INT LAMP : CONSULT- III Function (BCM - INT LAMP)".

Interior Room Lamp ON Operation • BCM always turns the interior room lamp ON when any door opens except back door.

• BCM activates the interior room lamp timer in any of the following conditions to turn the interior room lamp ON for a period of time.

- Status of all doors except back door changes from open to close - Ignition switch is turned ON → OFF - Door unlock signal is detected when all doors close except back door with ignition switch OFF

NOTE

:
The timer restarts if new condition is input during the timer operating time.

Interior Room Lamp OFF Operation BCM stops the timer in any of the following conditions to turn the interior room lamp OFF.

• The timer operating time is expired • Ignition switch is turned OFF → ACC/ON • Door lock signal is detected with all doors close except back door.

LUGGAGE ROOM LAMP CONTROL

BCM turns luggage room lamp ON when the following condition is detected.

• Back door switch is ON BCM turns luggage room lamp OFF when the following condition is detected.

• Back door switch is OFF

PUSH-BUTTON IGNITION SWITCH ILLUMINATION CONTROL (WITH INTELLIGENT KEY)

Push-button Ignition Switch Illumination Basic Operation BCM provides the power supply to turn the push-button ignition switch illumination ON.

Push-button Ignition Switch Illumination ON Operation BCM turns the push-button ignition switch illumination ON in the following conditions.

• Ignition switch ON
• Any of the following conditions with ignition switch OFF/ACC - Engine start permission is entered - Driver side door is LOCK → UNLOCK - Driver side door is open

Push-button Ignition Switch Illumination OFF Operation BCM turns the push-button ignition switch illumination OFF in any of the following conditions.

• The push-button ignition switch illumination ON conditions do not satisfy. • Any of the following conditions with ignition switch OFF.

- The push-button ignition switch illumination ON conditions do not change (15 seconds after the ignition switch OFF)
- Driver side door is UNLOCK → LOCK

Interior room lamp battery saver system

INTERIOR ROOM LAMP BATTERY SAVER SYSTEM : System Diagram
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM : System Description

INTERIOR ROOM LAMP BATTERY SAVER SYSTEM : System Description

OUTLINE

• Interior room lamp battery saver is controlled by BCM.

• BCM turns applicable lamps OFF depending on the vehicle condition. This function prevents the battery from over-discharging if the driver neglects turning OFF the lamps.

Applicable lamps
• Map lamp
• Luggage room lamp

INTERIOR ROOM LAMP BATTERY SAVER FUNCTION

• When the ignition switch is turned to other position than ON, BCM operates the timer for a period of time to cut the interior room lamp power supply.

• BCM restarts the timer when any of the following signals changes while operating the timer.

- Ignition switch status*1 - Key switch status*2
- Door switch signal (ALL) - Door lock/unlock signal (remote keyless entry receiver, each door request switch*1, door lock and unlock switch, unlock sensor)

• BCM provides the interior room lamp power supply continuously when the ignition switch position is ON.

*1:With Intelligent Key
*2:Without Intelligent Key

NOTE

:
Each function of interior room lamp battery saver can be set by CONSULT-III. Refer to INL-13, "BATTERY SAVER : CONSULT-III Function (BCM - BATTERY SAVER)".

Illumination control system

ILLUMINATION CONTROL SYSTEM : System Diagram
ILLUMINATION CONTROL SYSTEM : System Description

ILLUMINATION CONTROL SYSTEM : System Description

OUTLINE

Each illumination lamp is controlled by each function of BCM and IPDM E/R.

Control by BCM
• Combination switch reading function • Headlamp control function

Control by IPDM E/R
• Relay control function

Control by combination meter • Meter illumination control function (Refer to MWI-11, "SPEEDOMETER : System Description".)

ILLUMINATION CONTROL

• BCM detects the combination switch condition by the combination switch reading function.

• BCM transmits position light request signal to IPDM E/R and combination meter according to tail lamp ON condition.

Tail lamp ON condition
- Lighting switch 1ST
- Lighting switch 2ND
- Lighting switch AUTO, and the auto light function ON judgment (With auto light system)

• IPDM E/R turns the integrated tail lamp relay ON according to position light request signal. It provides the power supply to each illumination lamp.

• Combination meter enters in the nighttime mode according to position light request signal. Under the nighttime mode the combination meter controls the illuminance by controlling the each illumination lamp (ground side).